Mr Safety Group Products

Universal Plug UX without screw

Sun, 20 May 2012 18:51:51 +0700

Universal Plug UX with screw

Sun, 20 May 2012 18:51:51 +0700

Universal Plug UX with eye screw, round hook and angle hook, nylon coated

Sun, 20 May 2012 18:51:51 +0700

Universal Frame Fixing FUR

Sun, 20 May 2012 18:51:51 +0700

Resin Capsule R M

Sun, 20 May 2012 18:51:51 +0700

Repair Pad FIX.it

Sun, 20 May 2012 18:51:51 +0700

S - Plug

Sun, 20 May 2012 18:51:51 +0700

Plug SX

Sun, 20 May 2012 18:51:51 +0700

Hammerfix N

Sun, 20 May 2012 18:51:51 +0700

Mirrow Fixing SKL M

Sun, 20 May 2012 18:51:51 +0700

WC and sanitary fixing WL

Sun, 20 May 2012 18:51:51 +0700

Plasterboard Fixing Metal GKM with Screw

Sun, 20 May 2012 18:51:51 +0700

Board Fixing PD with Screw

Sun, 20 May 2012 18:51:51 +0700

Metal Cavity Fixing HM with Screw

Sun, 20 May 2012 18:51:51 +0700

Metal Cavity Fixing HM with Hook

Sun, 20 May 2012 18:51:51 +0700

Metal spring Toggle KDH With Round Hook

Sun, 20 May 2012 18:51:51 +0700

High Performance Anchor FH

Sun, 20 May 2012 18:51:51 +0700

Universal Hook UH

Sun, 20 May 2012 18:51:51 +0700

Load Hook LS

Sun, 20 May 2012 18:51:51 +0700

Long Hook LH / Super Long Hook SH

Sun, 20 May 2012 18:51:51 +0700

Bicycle Hook FH

Sun, 20 May 2012 18:51:51 +0700

Multi Hooks MK H

Sun, 20 May 2012 18:51:51 +0700

Hammer percussion drill SDS-max

Sun, 20 May 2012 18:51:51 +0700

Hammer drill bit with self-centring drill tip and relief-ground drill flutes

Vacuum-hardened six fold cutting edge (four fold with special lengths) allows use under the most exacting conditions

Hammer drill SDS-Plus Driller

Sun, 20 May 2012 18:51:51 +0700

First hammer drill bit (chisel effect) with self-centring drill tip and relief-ground drill flutes.

Vacuum-hardened triple cutting edge allows use under the most exacting conditions.

Hammer drill SDS-Plus Pointer

Sun, 20 May 2012 18:51:51 +0700

Hammer drill (chisel effect) with self-centring drill tip and relief-ground drill flutes.

Stone drill STANDARD

Sun, 20 May 2012 18:51:51 +0700

Universal drill for impact and rotary drilling in masonry and natural stone.

Wall-breaching drill STANDARD

Sun, 20 May 2012 18:51:51 +0700

Drill for impact and rotary drilling in masonry and natural stone.

Diamond-bit FDB

Sun, 20 May 2012 18:51:51 +0700

Bit with diamond-coated tip for extreme requirements in a wide variety of screw applications.

High dimensional accuracy from modern cold forming technology.

Profi-bit FPB

Sun, 20 May 2012 18:51:51 +0700

Bit made of hard material (hardness 58-60 HRC) for machine operated screwing in series.

High dimensional accuracy from modern cold forming technology.

Wash basin and urinal fixing

Sun, 20 May 2012 18:51:51 +0700

WD, WST, UST, BO

Fixing sets consisting of UX-Plugs, stud screws, nylon nuts or flanged bushes with hexagon nut.

KM and WDP

Specially designed for fixing washstands and urinals to plumbing units and cavity walls.

WC and sanitary fixing

Sun, 20 May 2012 18:51:51 +0700

WCN

- Standard WC fixing with chrome or white coloured cap.

- Brass screw with hexagon head and slot.

- A large snap-fit sleeve compensates for fairly large or slightly mis-formed holes drilled through the porcelain.

- Also suitable for fixing mirrors and ceramic shelves.

S 8 D 70

- WC fixing with white and chrome-coloured cap.

- Brass screw with hexagon head and slot.

S 8 RD

- Standard WC fixing with white and chrome-coloured cap.

- Brass screw with hexagon head and slot.

- The plug‘s collar cleanly closes off the drill hole and enables the cap to fit securely into place.

- Fixing set consisting of S-Plug, wood screw and washer.

- For fixing boilers, stationary electric appliances, gas heaters, cisterns, etc.

ClipFix plus cable strap LS

Sun, 20 May 2012 18:51:51 +0700

Cable strap for direct fixing of individual cables and cable bundles of 3 to 40 mm diameter.

ClipFix plus single clamp ES / Twin clamp ZS

Sun, 20 May 2012 18:51:51 +0700

Complete fixing element for simple and time-saving plug-fitting of conduits or flexible pipes.

For wall, floor and ceiling installation.

ClipFix plus Pipe Clip RC

Sun, 20 May 2012 18:51:51 +0700

Pipe clip with pre-fitted fixing pin for simple and time-saving plug-fitting of plastic insulation pipes.

The pre-fitted fixing pin SD can be removed.

MM Drill Bit

Sun, 20 May 2012 18:51:51 +0700

MM drill bits is one of particular drill masonry product that has good quality, used in many applications such as residential, industrial, building, etc.

Advantages / Benefits :

Suitable for masonry

Easy to use

Good results

Strong and durable

Pipe Clip RC

Sun, 20 May 2012 18:51:51 +0700

Polyamid pipe clip for simple and time-saving installation of plastic insulation pipes.

MM Screw

Sun, 20 May 2012 18:51:51 +0700

One of the leading product of Mr. Safety is a screw with a variety of kind, have high strength and easy to use for various applications.

Advantages / Benefits :

Easy installation

Reducing the frictional resistance

Good results

Strong and durable

Pipe Clip FC

Sun, 20 May 2012 18:51:51 +0700

Pipe Clip for efficient running of cables and pipelines.

Nylon Saddle SCH

Sun, 20 May 2012 18:51:51 +0700

Nylon saddle clip for efficient running of cables and pipelines with different diameters.

Nail Clip NS

Sun, 20 May 2012 18:51:51 +0700

Nail clip with pre-assembled hardened nail for the efficient installation of conduits.

Metal Cavity Fixing HM

Sun, 20 May 2012 18:51:51 +0700

Zinc-plated cavity metal fixing with metric screw.

The expanding arms spread out behind the board and press against a large surface.

Toggle fixings K, KD, KDH, KDR, KM

Sun, 20 May 2012 18:51:51 +0700

Nylon toggle K 54

Cavity fixing with a tilting crosspiece for woodscrews, 4 mm diameter

Spring toggle KD/ KDH 3/4

Expands by spring force into any cavity.

Gravity toggle KD/ KDH 5/6/8

Has a tilting crosspiece which automatically locks itself in cavities.

KM 10

Specially designed for fixing washstands and urinals to plumbing units and cavity walls.

CAFCO Mandolite 550

Sun, 20 May 2012 18:51:51 +0700

CAFCO Mandolite 550 is a spray applied, single package factory controlled premix, based on vermiculite and portland cement. It may be used anywhere above the splash zone on offshore installations, and even in the splash zone with suitable protection. It is easy to install and maintain in a wide range of climates.

CAFCO Mandolite 550 is used for application to offshore steel or concrete structures, storage vessels and supports. It is also used on pre-assembled units prior to transportation to site as well as to structures fire proofed after site erection. The offshore oil and gas industries will benefit from the use of CAFCO Mandolite 550

CAFCO Fendolite MII

Sun, 20 May 2012 18:51:51 +0700

Integrated Fire Protective Coating System, CAFCO Fendolite MII is a spray applied, single package factory controlled premix, based on vermiculite and portland cement. It produces a monolithic coating able to withstand the thermal shocks experienced in a high intensity hydrocarbon fire. Concrete structures in particular, will be protected from explosive saplling when coated with CAFCO Fendolite MII.

CAFCO Fendolite MII is used for application on construction elements such as individual steel or concrete sections particularly where off site application is required. It is also suitable for use on structures and vessels in the oil, gas, petrochemical and power industries.

Board Fixing PD

Sun, 20 May 2012 18:51:51 +0700

Conical expansion fixing for board materials from 8 mm thickness

When the screw is tightened, the plastic cone is pulled into the sleeve and expands the fixing.

Plasterboard Fixing Metal GKM

Sun, 20 May 2012 18:51:51 +0700

The self-tapping metal fixing GKM taps itself mechanical interlock in plasterboard.

CAFCO Sprayfilm WB3

Sun, 20 May 2012 18:51:51 +0700

Water Based Intumescent Coating, Cafco SPRAYFILM WB3 is a water based intumescent coating consisting of polyvinyl acetate resins and fillers for the fire protection of structural steel. It can be sealed and protected with a decorative
top coat. Cafco SPRAYFILM WB3 is applied directly to the contour of primed I and H-section columns, angles, channels and beams, and hollow sections, to provide fire protection for up to 120 minutes. In a fire, a chemical reaction takes place, causing the Cafco SPRAYFILM WB3 to expand and form an
insulating layer which prevents the temperature of the steel rising above a critical level.

CAFCO Mandolite CP2

Sun, 20 May 2012 18:51:51 +0700

Cafco MANDOLITE CP2 is a spray applied, single package factory controlled premix, based on vermiculite and Portland cement, for internal use. Cafco MANDOLITE CP2 produces a monolithic coating able to withstand the thermal shocks experienced in a high intensity cellulosic fire. Concrete structures in particular, will be protected from explosive spalling when coated with Cafco MANDOLITE CP2. Although low in density, thus significantly reducing dead load, Cafco MANDOLITE CP2 is highly durable and will not crack or spall under mechanical impact.

Cafco MANDOLITE CP2 may be applied within environments where limited exposure to the elements is likely throughout the building phase of the project, e.g. perimeter beams. Cafco MANDOLITE CP2 is used for application to steel and concrete frames, metal floor or roof decks, and return air plenums. It may be easily removed and reinstated locally when additional fixings are required. Building types that will benefit from the use of Cafco MANDOLITE CP2, include a wide range of educational, leisure and entertainment centres, commercial or industrial projects.

CAFCO Fendolite TG

Sun, 20 May 2012 18:51:51 +0700

Integrated Fire Protective Coating System, Cafco FENDOLITE TG is a trowel applied, factory controlled premix based on vermiculite and Portland cement. It is used with potable water added on site. Cafco FENDOLITE TG will not fail suddenly after the prescribed fire resistance period but will continue to offer a predictable level of fire protection for the duration of the fire. Cafco FENDOLITE TG is ideal for application by trowel in interior and fully exposed environments

CAFCO 300

Sun, 20 May 2012 18:51:51 +0700

Vermiculite Gypsum Based Wet Mix Spray, CAFCO 300 is a spray or trowel applied, single package factory controlled premix, based on
vermiculite and gypsum, for internal use. CAFCO 300 is a lightweight coating that provides very efficient fire resistance with minimal thickness
to steel and concrete frames, metal floor and roof decks, and to return air plenums. Structures protected with CAFCO® 300 can provide fire resistance for up to 240 minutes. Building types that will benefit from the use of CAFCO® 300 include a wide range of educational, leisure and entertainment centres, and commercial projects.

PROMASEAL Mortar

Sun, 20 May 2012 18:51:51 +0700

PROMASEAL Mortar is a specially formulated, lightweight, hydraulic cement composition supplied as a premixed dry powder. It can be troweled into position for sealing of openings required for the passage of services such as electrical cables/pipes, busways and busbars, telecommunication cables. It can also be used to seal openings after services have been removed or where no services are present.

PROMASEAL Mortar is grey colour and is packaged in convenient 20kg bags. It can be mixed with varying quantities of clean water for different consistencies.

PROMASEAL Electrical Junction Seal

Sun, 20 May 2012 18:51:51 +0700

PROMASEAL Electrical Junction Seal is a system that will prevent this spread of fire for up to 120 minutes where steel trunking passes through compartment floors and walls of the same or greater fire resistance.

PROMASEAL Electrical Junction Seals are suitable for use in any building which has steel trunking which penetrates fire rated compartment walls or floors. When exposed to the heat of a fire, the intumescent will expand, to form a solid plug inside the trunking around the electrical cables, thus preventing the spread of fire through the trunking.

PROMASTOP Cement

Sun, 20 May 2012 18:51:51 +0700

PROMASTOP Cement is a lightweight fire resistant cement supplied as a dry powder for on site preparation. It is mixed on site with clean water. This fine grade cement powder is white colour for ease of identification and has a quick setting time. It can also provide some degree of load bearing capability depending on the thickness of cement layer apply.

PROMASOP Cement is white in colour and is package in convenient 20kg bags.

PROMASEAL Bulkhead Sealer system

Sun, 20 May 2012 18:51:51 +0700

PROMASEAL Bulkhead Sealer System is made from high density rock fibre panels coated with PROMASEAL Bulkhead Sealer. The system act as a fire barrier to seal off openings in walls or floors thus preventing the passage of fire. It is simplest of all fire stopping products to use, and also one of, if not the most economical product to use. It can be supplied in a 5kg container or as precoated batts measuring 1200mm x 600mm.

PROMASEAL AN

Sun, 20 May 2012 18:51:51 +0700

PROMASEAL AN, Acrylic sealant is a gunable sealant designed for the sealing of joints and services penetrations against the spread of fire, smoke and hot gases for up to 240 minutes fire resistance when tested to AS1530: Part 4, AS4072: Part 1 and BS476: Part 20. In addition, PROMASEAL AN Acrylic sealant may be used as acoustic sealant due to its density and flexibility.

PROMASEAL AN Acrylic Sealant can be supplied in :

- 300ml cartridges

- 600ml foil packs

PROMASTOP Unicollar

Sun, 20 May 2012 18:51:51 +0700

PROMASTOP Unicollar is one of a new generation of fire collars designed to protect uPVC, HDPE, PP adn other plastic pipes which pass through fire rated elements of building construction. The product has been tested and approved to the relevant criteria of most international standards which include AS1530: Part 4, BS476: Part 20 and has UL Certification for FRL up to 240 minutes. Test in accordance with EN standards are available upon request.

PROMATECT - H

Sun, 20 May 2012 18:51:51 +0700

PROMATECT - H, is a non combustible matrix engineered mineral board reinforced with selected fibres and fillers. It is formulated without inorganic fibres and does not contain formaldehyde, the colour is off white and has a smooth finish on one face with a sanded reverse face, also can be left undecorated or easily finished with paints, wallpapers or tiles.

PROMATECT - H, is resistant to the effects of moisture and will not physically deteriorate when used in damp or humid conditions. Performance characteristics are not degraded by age or moisture.

Application :
- Structural steel
- Ceilings, floors and roofs
- Partitions and external walls
- Ventilations and smoke extraction ducts
- Electrical and mechanical services enclosures
- Fire resistant glazing
- Tunnel fire protection and upgrading of concrete structures
- Smoke barriers, access panels, and hatches

Eye screw GS

Sun, 20 May 2012 18:51:51 +0700

Universal 8 & 10 mm eye screw for nylon fixings and wood.

Scaffold eyebolt FI G12

Sun, 20 May 2012 18:51:51 +0700

Scaffold eyebolt with metric thread M12 for combination with internal threaded fixings.

Scaffold anchoring GS 12

Sun, 20 May 2012 18:51:51 +0700

Welded scaffolding eyebolt GS 12 with eye diameter of 23mm, use in conjuction with long shaft fixings

StoCrete NSG-H

Sun, 20 May 2012 18:51:51 +0700

Standard Non-shrink Grout, StoCrete NSG-H is a non shrink, cement based, high strength developing grout which is specially formulated for use in critical grouting operations where positive expansion and non-staining chracteristics is required.

StoPox EPG

Sun, 20 May 2012 18:51:51 +0700

Standard Epoxy Grout, StoPox EPG is a 3 component solvent free epoxy resin grout.

StoPox WL 100

Sun, 20 May 2012 18:51:51 +0700

Aqueous Epoxy Resin Coating, StoPox WL 100 is a pigmented, 2 component, aqueous epoxy resin.

StoJet IH-BV

Sun, 20 May 2012 18:51:51 +0700

General Purpose Epoxy Injection Resin, StoJet IH-BV is a 2 component solvent free, non pigmented epoxy resin compound with low viscosity.

StoPox EPA

Sun, 20 May 2012 18:51:51 +0700

Epoxy Resin Concrete Bonding Agent, StoPox EPA is a solvent free epoxy resin formulation used for bonding new cementious materials to existing cementitious surfaces.

StoJet J-Thane

Sun, 20 May 2012 18:51:51 +0700

Polyurethane Injection Resin, StoJet J-Thane is a low viscosity polyurethane injection resin which rapidlyexpands in contact with water.

StoCrete CCW-Elastic

Sun, 20 May 2012 18:51:51 +0700

Flexible Cementitious Waterproofing Membrane, StoCrete CCW-Elastic is a 2 component, flexible, cementitious waterproofing membrane which bonds excellently to most masonry and concrete substrates to protect against ingress of water.

Plug SX

Sun, 20 May 2012 18:51:51 +0700

Nylon expansion fixing

For use with wood, chipboard and self-tapping screws and ASL spacing screws (see chapter spacing screws).

SX long versions for higher anchoring depth in perforated building materials, aircrete and to bridge plaster.

Click here how to install fischer plug SX

StoCrete CCW

Sun, 20 May 2012 18:51:51 +0700

Cementious Waterproofing Membrane, StoCrete CCW is a heavy-duty cement based waterproofing coating for all masonty and concrete surfaces.

StoCrete 4222

Sun, 20 May 2012 18:51:51 +0700

Cementious Waterproofing Slurry for Concrete and Masonty Surfaces, StoCrete 4222 is a heavy-duty cement based waterproofing coating for all masonty and concrete substrates.

S - Plug

Sun, 20 May 2012 18:51:51 +0700

Nylon expansion fixing.

For use with wood-, chipboard-, and self-tapping screws (see chapter safety-screws)

Universal Plug UX

Sun, 20 May 2012 18:51:51 +0700

Nylon universal fixing

Expansion in solid building materials, reliable knot formation in all cavities.

Use UX 6 long versions with fischer spacing screws for maximum load-bearing capacity in perforated materials, double-skinned plasterboard and for bridging non-load-bearing layers.

Turbo Aircrete Anchor FTP

Sun, 20 May 2012 18:51:51 +0700

Spiral external thread cuts a mechanical interlock in aircrete.

For use with screws of diameters 4 to 10 mm.

Doorstop TS

Sun, 20 May 2012 18:51:51 +0700

Doorstop for floors and walls, with invisible fixing.

Repair Pad FIX.it

Sun, 20 May 2012 18:51:51 +0700

Repair pad for damaged holes.

Wet the special pad with water, wrap it around the fixing and push it into the damaged hole.

After about three minutes the special pad has hardened and the component can then be attached.

Specially developed for lightweight fixings.

Universal Frame Fixing FUR

Sun, 20 May 2012 18:51:51 +0700

Universal frame fixing.

Anchorage in solid materials by means of friction locking.

The asymmetrical close set teeth expand and form lock in hollow materials.

Fixing sets with safety screws made of stainless steel for applications in damp conditions.

Hammerfix N

Sun, 20 May 2012 18:51:51 +0700

Nylon Hammerfixing.

The fixing is expanded when the nail is driven in, and holds by friction in the drill hole.

Screw nail in A2 stainless steel for applications in damp conditions.

Window Frame Fixing F-S

Sun, 20 May 2012 18:51:51 +0700

Nylon window frame fixing

By tightening the screw, the glass-fibre reinforced plastic cone is drawn into the sleeve, whereby the fixing is expanded and wedged inside the drill hole.

Metal Frame Fixing F-M

Sun, 20 May 2012 18:51:51 +0700

Metal frame fixing

By tightening the screw, the cone is drawn into the sleeve and the fixing is expanded which wedges it inside the drill hole.

Anchor Bolt FAZ

Sun, 20 May 2012 18:51:51 +0700

Anchor bolt for push-through installation.

When the hexagonal nut is tightened, the tapered bolt is pulled into the expansion clip and expands it against the drill hole wall.

Version FAZ made of stainless steel A4 for outdoor applications and for damp rooms. High corrosion resistant steel (material number 1.4529) for applications in aggressive atmospheres.

FAZ-GS with large pre-assembled washer for fixings in oblong holes.

Bolt FBN

Sun, 20 May 2012 18:51:51 +0700

Anchor bolt for push-through and pre-positioned installation.

When the hexagon nut is tightened, the tapered bolt is pulled

into the expansion clip and expands it against the drill hole wall.

A4 stainless steel version for outdoor use and in damp conditions.

GS version with large washer for wood constructions in accordance with DIN 440.

Zykon Anchor FZA

Sun, 20 May 2012 18:51:51 +0700

Undercut anchor for pre-positioned (FZA bolt version and Iinternally-threaded anchor FZA-I) and push-through installation (FZA-D bolt version).

A cylindrical conical hole with an undercut is produced with the Drill bit FZUB in one work process.

When setting the anchor, the anchor sleeve is driven over the cone with a hammer (or setting tool) and fills the undercut hole with a positive fi t.

Also available: special version FZA ST A4 for hot step irons according to DIN V 1211 GS / 1212 GS.

A4 stainless steel version for outdoor use and in damp conditions. Highly corrosion-resistant steel C (material no. 1.4529) for applications in aggressive atmospheres.

High Performance Anchor FH

Sun, 20 May 2012 18:51:51 +0700

Heavy-duty sleeve anchor for push-through installation.

When the hexagon nut or bolt is tightened, the cone is pulled into the expansion sleeve and expands it against the hole wall.

FH version made from A4 stainless steel for outdoor use and in damp conditions (not part of the approval).

Hammerset Anchor EA-N

Sun, 20 May 2012 18:51:51 +0700

Hammerset anchor with internal thread for pre-positioned installation.

When the expander cone is driven in with EAW H Plus setting tool, the anchor sleeve is expanded and is pressed against the hole wall.

Highbond Anchor FHB II

Sun, 20 May 2012 18:51:51 +0700

Flexible system as both injection cartridge and resin capsule can be used.

Suitable for use in cracked tensile zone guarantees highest safety.

Low-expansion force allows cost-efficient fixing with small edge distances and axial spacings.

Ergonomic application gun guarantees fixing with small edge distances and axial spacings.

Quick installation by hand without a setting tool reduces the work involved.

Highbond Anchor Dynamic FHB dyn

Sun, 20 May 2012 18:51:51 +0700

The injection system suitable for cracked concrete consists of a fischer Highbond dynamic anchor stud and Injection mortar FIS HB.

The FIS HB injection mortar is a high-strength 2-component vinylester mortar.

When ejected by using the special application gun, the two components are mixed and activated in the static mixer.

Partially used cartridges can be reused, simply by changing the static mixer.

The mortar bonds the entire surface of the anchor rod to the wall of the drilled hole and largely seals the hole.

Anchor rod FHB-C made of high corrosion-resistant steel C for outdoor use, in damp conditions and in high chloride atmospheres, e.g. tunnels.

Resin Anchor R (Eurobond)

Sun, 20 May 2012 18:51:51 +0700

The established fixing system consists of the RG M threaded rod and the resin capsule RM.

The 2-component resin capsule RM contains quick-setting styrene-free vinylester resin and hardener.

During setting, the edges of the internal threaded rod destroy the capsule in drill hole, mix and activate the mortar.

The resin adheres to the entire surface of the internal threaded anchor, bonding it to the wall of the drilled hole.

Internal-threaded Anchor RG MI

Sun, 20 May 2012 18:51:51 +0700

The fixing system consists of the Internal-threaded anchor RG MI and the resin capsule R M.

The resin capsule R M contains quick-curing styrene-free vinylester resin.

Suitable for commercially-available metric screws and threaded rods.

During setting, the edges of the internal threaded anchor destroy the capsule in drill hole, mix and activate the resin.

The resin adheres to the entire surface of the internal threaded anchor, bonding it to the wall of the drilled hole.

Injection Mortar FIS VT 380 C

Sun, 20 May 2012 18:51:51 +0700

Styrene-free, quick-curing vinylester resin in the coaxil cartridge for concrete and masonry.

Resin and hardener are stored in two separate chambers and are not mixed and activated untul pushed through the static mixer.

Partially used cartridges can easily be reused by changing the static mixer.

Defined load-bearing capacity as per approval and seure anchorage like cast-in reinforcement bars to European standard (EC) and DIN EN 1504

Injection Mortar FIS P

Sun, 20 May 2012 18:51:51 +0700

Styrene-free polyester resin for fixing in masonry building materials.

Resin and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer.

Partially-used cartridges can easily be reused by changing the static mixer.

FIS P 300 T with longer curing time and lower application pressure.

FIS P 300 T can be extruded by using a conventional application gun.

FIS P 380 C in coaxial cartridge is extruded by using a special application gun.

FIS P 360 S in shuttle cartridge is extruded by using a special application gun.

Injection Mortar FIS EM

Sun, 20 May 2012 18:51:51 +0700

Best performance mortar in the shuttle cartridge based on epoxy resin.

Optimum solution for concrete (anchor rods and reinforcement bars).

Resin and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer.

Partially used cartridges can easily be reused by changing the static mixer.

Diamond Core Drill SP-300A

Sun, 20 May 2012 18:51:51 +0700

Core drilling for professional use

Drilling works for reinforced concrete, stone and ceramics

High power motor and aluminum alloy are combined

Pursuing workability at a narrow place and a high place, the function and shape are chosen

Easy to use

Diamond Core Drill SP-200A

Sun, 20 May 2012 18:51:51 +0700

Most powerful motor at this class, light and compact core drill

Drilling works for reinforced concrete, stone and ceramics

High power motor and aluminum alloy are combined

Pursuing workability at a narrow place and a high place, the function and shape are chosen

Easy to use

Lifeline Emergency Escape System

Sun, 20 May 2012 18:51:51 +0700

An Alternative device for emergency escape if fire happend

In demand of High-Rise rescue, realizing that emergency exit are limited in capacity and accessibility, people should have a choice to rescue themselves. Thinking out of the box, Australia based Lifeline Descent System has developed the world first portable controlled descents device that giving people an option to help themselves in high rise emergency requiring immediate evacuation.

Click here how Lifeline Emergency Escape System works

NanEX Nano Fire Extinguisher

Sun, 20 May 2012 18:51:51 +0700

NanEX Nano Fire Extinguisher, An Innovative Product Solution for your electrical application