Suitable for:
- Cracked and non-cracked concrete C20/25 to C50/60
- Concrete C12/15
- Natural stone with dense structure

For fixing of:
- Steel constructions
- Railings
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Facades
- Window elements
- Wood constructions

Advantages / benefits :
- Optimised expansion clip ensures uniform load distribution for high permissible loads and small edge distances and axial spacings with structural elements, as well as secure expansion, even in cracked concrete.
- Installation-friendly, since only a few revolutions are necessary to apply the torque.

Suitable for:
- Non-cracked concrete C20/25 to C50/60
- Concrete C12/15
- Natural stone with dense structure

For fixing of:
- Steel constructions
- Railings
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Facades
- Window elements
- Wood constructions

Advantages / benefits :
- FBN II gvz offers maximum load-bearing capacity in non cracked concrete – anchoring base can not bear higher loads is totally utilised.
- Reduced anchorage depth reduces drill time – this saves time and reduces reinforcement hits during drilling.
- Long thread allows stand-off installations and variable usable lengths.
- 8 to 16 mm diameter also for reduced anchorage depths, e.g. for small loads or if reinforcement is hit.
- Embossed letter on the head for subsequent control of the installation as it indicates the setting depth.

Suitable for :
- Cracked and non-cracked concrete B25 to B55 resp. C20/25 to C50/60
- Concrete B15 resp. C12/15
- Natural stone with dense structure
- Solid brick
- Solid sand-lime brick

For fixing of:
- Steel constructions
- Railings
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Facades
- Window elements

Advantages / benefits :
- Positive fi t in the undercut gives additional safety.
- Virtually expansion-free operation allows cost-efficient fixing with very small edge distances and axial spacings.
- Single-step drilling process simultaneously produces the undercut, saving installation time.
- Simple visual control of the green ring mark ensures 100% function.
- Immediate load-bearing capability avoids installation interruptions (no interruption for resin curing times, unlike chemical anchors).
- Anchor version with internal thread for high flexibility by using threaded rods or screws of different lengths and type.

Suitable for :
- Cracked and non-cracked concrete C20/25 to C50/60
- Concrete C12/15
- Natural stone with dense structure.

For fixing of :
- Steel constructions
- Railings
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Gates
- Facades
- Window elements

Advantages / Benefits :
- For stylish fixings.
- Highest tensile and shear loads for push-through installation.
- Simple and easy setting: Anchor setting with a few, light hammer blows.
- Surface flush removal.
- Minimum axial and edge distances.
- Anchor versions for fixings with sophisticated design : FH-S (hexagon head screw), FH-H (cap nut) and FH-SK (countersunk screw).
- All anchors can be removed flush with the surface.

Suitable for :
- Non-cracked concrete C12/15
- Natural stone with dense structure

Advantages / Benefits :
- suitable for non-crackeed concrete and for anchoring light ceiling linings and suspended ceilings.
- Suitable for all screws or studs with metric threads.
- Low anchoring depth reduces drilling time and thus cost-efficient installation.
- Surface-flush anchor allows the attached item to be removed and refitted several times.